Skip to main content

Account-related Tasks

The account command is the home for most consensus and ParaTime-layer on-chain transactions that are signed with one of your accounts such as:

  • getting the account balance including delegated assets,
  • sending tokens,
  • delegating or undelegating tokens to or from validators (staking),
  • depositing and withdrawing tokens to or from a ParaTime,
  • managing withdrawal beneficiaries of your accounts,
  • validator utils such as entity registration, setting the commission schedule, unfreezing your node and similar.

Network, ParaTime and Account Selectors

Before we dig into account subcommands, let's look at the three most common selectors.

Network

The --network <network_name> parameter specifies the network which the Oasis CLI should connect to.

For example:

oasis account show oasis1qzzd6khm3acqskpxlk9vd5044cmmcce78y5l6000 --network testnet
Address: oasis1qzzd6khm3acqskpxlk9vd5044cmmcce78y5l6000

=== CONSENSUS LAYER (testnet) ===
Nonce: 0

Total: 1.0 TEST
Available: 1.0 TEST

oasis account show oasis1qzzd6khm3acqskpxlk9vd5044cmmcce78y5l6000 --network mainnet
Address: oasis1qzzd6khm3acqskpxlk9vd5044cmmcce78y5l6000

=== CONSENSUS LAYER (mainnet) ===
Nonce: 0

Total: 0.0 ROSE
Available: 0.0 ROSE

ParaTime

The --paratime <paratime_name> sets which ParaTime Oasis CLI should use. If you do not want to use any ParaTime, for example to perform a consensus layer operation, pass the --no-paratime flag explicitly.

oasis account show eric --no-paratime
Address: oasis1qzplmfaeywvtc2qnylyhk0uzcxr4y5s3euhaug7q

=== CONSENSUS LAYER (testnet) ===
Nonce: 0

Total: 0.0 TEST
Available: 0.0 TEST

Account

The --account <account_name> specifies which account in your wallet the Oasis CLI should use to sign the transaction with.

oasis account transfer 1.5 0xDce075E1C39b1ae0b75D554558b6451A226ffe00 --account orlando
You are about to sign the following transaction:
Format: plain
Method: accounts.Transfer
Body:
To: test:dave (oasis1qrk58a6j2qn065m6p06jgjyt032f7qucy5wqeqpt)
Amount: 1.5 TEST
Authorized signer(s):
1. cb+NHKt7JT4fumy0wQdkiBwO3P+DUh8ylozMpsu1xH4= (ed25519)
Nonce: 0
Fee:
Amount: 0.000231 TEST
Gas limit: 2310
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: orlando
oasis account transfer 1.5 0xDce075E1C39b1ae0b75D554558b6451A226ffe00 --account eric
You are about to sign the following transaction:
Format: plain
Method: accounts.Transfer
Body:
To: test:dave (oasis1qrk58a6j2qn065m6p06jgjyt032f7qucy5wqeqpt)
Amount: 1.5 TEST
Authorized signer(s):
1. A1ik9X/7X/eGSoSYOKSIJqM7pZ5It/gHbF+wraxi33u3 (secp256k1eth)
Nonce: 0
Fee:
Amount: 0.0002316 TEST
Gas limit: 2316
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: eric
tip

You can also set the default network, ParaTime or account to use, if no network, ParaTime or account selectors are provided.

Show the Balance of an Account

The account show [address] command prints the balance, delegated assets and other validator information corresponding to:

  • a given address,
  • the name of the address book entry or
  • the name of one of the accounts in your wallet.

The address is looked up both on the consensus layer and the ParaTime, if selected.

Running the command without arguments will show you the balance of your default account on the default network and ParaTime:

oasis account show
Address: oasis1qp87hflmelnpqhzcqcw8rhzakq4elj7jzv090p3e

=== CONSENSUS LAYER (testnet) ===
Nonce: 2

Total: 0.0 TEST
Available: 0.0 TEST

You can also pass the name of the account in your wallet or address book, or one of the built-in named addresses:

oasis account show orlando
Address: oasis1qq84sc4q0shp5c5klwklqu59evz2mg59hveg7dqx

=== CONSENSUS LAYER (testnet) ===
Nonce: 0

Total: 10.0 TEST
Available: 10.0 TEST

oasis acc show pool:consensus:fee-accumulator
Address: oasis1qqnv3peudzvekhulf8v3ht29z4cthkhy7gkxmph5

=== CONSENSUS LAYER (testnet) ===
Nonce: 0

Total: 0.0 TEST
Available: 0.0 TEST

Or, you can check the balance of an arbitrary account address by passing the native or Ethereum-compatible addresses.

oasis account show oasis1qzzd6khm3acqskpxlk9vd5044cmmcce78y5l6000
Address: oasis1qzzd6khm3acqskpxlk9vd5044cmmcce78y5l6000

=== CONSENSUS LAYER (testnet) ===
Nonce: 0

Total: 1.0 TEST
Available: 1.0 TEST

oasis account show 0xA3243B310CfA8D4b008780BC87E0bb9f6d4FDA06
Address: oasis1qzplmfaeywvtc2qnylyhk0uzcxr4y5s3euhaug7q

=== CONSENSUS LAYER (testnet) ===
Nonce: 0

Total: 0.0 TEST
Available: 0.0 TEST

=== sapphire PARATIME ===
Nonce: 0

Balances for all denominations:
- Amount: 10.0
Symbol: TEST

To also include any staked assets in the balance, pass the --show-delegations flag. For example:

oasis account show oasis1qrec770vrek0a9a5lcrv0zvt22504k68svq7kzve --show-delegations
Address: oasis1qrec770vrek0a9a5lcrv0zvt22504k68svq7kzve
Nonce: 33

=== CONSENSUS LAYER (testnet) ===
Total: 972.898210067 TEST
Available: 951.169098086 TEST

Active Delegations from this Account:
Total: 16.296833986 TEST

Delegations:
- To: oasis1qz2tg4hsatlxfaf8yut9gxgv8990ujaz4sldgmzx
Amount: 16.296833986 TEST (15000000000 shares)
Debonding Delegations from this Account:
Total: 5.432277995 TEST

Delegations:
- To: oasis1qz2tg4hsatlxfaf8yut9gxgv8990ujaz4sldgmzx
Amount: 5.432277995 TEST (5432277995 shares)
End Time: epoch 26558

Allowances for this Account:
Total: 269.5000002 TEST
Allowances:
- Beneficiary: oasis1qqczuf3x6glkgjuf0xgtcpjjw95r3crf7y2323xd
Amount: 269.5 TEST
- Beneficiary: oasis1qrydpazemvuwtnp3efm7vmfvg3tde044qg6cxwzx
Amount: 0.0000002 TEST

=== sapphire PARATIME ===
Balances for all denominations:
6.9995378 TEST

Let's look more closely at the figures above. The account's nonce is the incremental number starting from 0 that must be unique for each account's transaction. In our case, the nonce is 32. This means there have been that many transactions made with this account as the source. The next transaction should have nonce equal to 32.

We can see that the total account's balance on the consensus layer is ~973 tokens:

  • ~951 tokens can immediately be transferred.
  • ~16.3 tokens (15,000,000,0000 shares) are staked (delegated).
  • ~5.4 tokens are debonding and will be available for spending in the epoch 26558.
  • up to ~270 tokens are allowed to be transferred to accounts oasis1qqczuf3x6glkgjuf0xgtcpjjw95r3crf7y2323xd and oasis1qrydpazemvuwtnp3efm7vmfvg3tde044qg6cxwzx without the signature of the account above.

Separately, you can notice there are ~7 tokens currently deposited in Sapphire.

info

The --show-delegations flag is not enabled by default, because account delegations are not indexed on-chain. This means that the endpoint needs to scan block by block to retrieve this information and takes some time often leading to the timeout on public endpoints due to denial-of-service protection.

Next, let's look at how the account of a validator typically looks like. For example:

oasis account show oasis1qz8w4erh0kkwpmdtwd3dt9ueaz9hmzfpecjhd7t4 --show-delegations
Address: oasis1qz8w4erh0kkwpmdtwd3dt9ueaz9hmzfpecjhd7t4
Nonce: 17

=== CONSENSUS LAYER (testnet) ===
Total: 1300.598418401 TEST
Available: 52.73923316 TEST

Active Delegations from this Account:
Total: 1247.859185241 TEST

Delegations:
- To: oasis1qz8w4erh0kkwpmdtwd3dt9ueaz9hmzfpecjhd7t4 (self)
Amount: 1247.859185241 TEST (1167021437369 shares)

Active Delegations to this Account:
Total: 1833.451690691 TEST
(1714678589317 shares)

Delegations:
- From: oasis1qz8w4erh0kkwpmdtwd3dt9ueaz9hmzfpecjhd7t4 (self)
Amount: 1247.859185241 TEST (1167021437369 shares)
- From: oasis1qztnau4t75cf8wh3truwtl7awvnkwe4st5l25yfn
Amount: 148.289115949 TEST (138682777102 shares)
- From: oasis1qrvguq055xh42yjl84yn2h5dhm59fkzg9st0mu90
Amount: 116.290596782 TEST (108757158672 shares)
- From: oasis1qzhulmesqkcu23r0h5hfslwelud46mkm25zh7uqq
Amount: 111.30081746 TEST (104090622972 shares)
- From: oasis1qq05qnywdzz3m45dzqxuek0p4a5dxr86rgxlxc58
Amount: 104.855987628 TEST (98063296601 shares)
- From: oasis1qzpvsgt56jxz324dxjv5272mz4j6kfadd5ur7f98
Amount: 104.855987628 TEST (98063296601 shares)

Commission Schedule:
Rates:
(1) start: epoch 15883
rate: 7.0%
(2) start: epoch 15994
rate: 11.0%
(3) start: epoch 16000
rate: 14.0%
(4) start: epoch 16134
rate: 18.0%
Rate Bounds:
(1) start: epoch 15883
minimum rate: 0.0%
maximum rate: 10.0%
(2) start: epoch 15993
minimum rate: 0.0%
maximum rate: 20.0%

Stake Accumulator:
Claims:
- Name: registry.RegisterEntity
Staking Thresholds:
- Global: entity
- Name: registry.RegisterNode.LAdHWnCkjFR5NUkFHVpfGuKFfZW1Cqjzu6wTFY6v2JI=
Staking Thresholds:
- Global: node-validator
- Name: registry.RegisterNode.xk58fx5ys6CSO33ngMQkgOL5UUHSgOSt0QbqWGGuEF8=
Staking Thresholds:
- Global: node-compute
Staking Thresholds:
- Global: node-compute
Staking Thresholds:
- Global: node-compute

We can see there is a total of ~1833 tokens delegated to this validator. One delegation was done by the account itself and then there are five more delegators. Sometimes, we also refer to accounts with delegated assets to it as escrow accounts.

Next, we can see a commission schedule. A validator can charge commission for tokens that are delegated to it in form of the commission schedule rate steps (7%, 11%, 14% and 18% activated on epochs 15883, 15994, 16000 and 16134 respectively) and the commission schedule rate bound steps (0-10% on epoch 15883 and then 0-20% activated on epoch 15993). For more details, see the account amend-commission-schedule command.

An escrow account may also accumulate one or more stake claims as seen above. The network ensures that all claims are satisfied at any given point. Adding a new claim is only possible if all of the existing claims plus the new claim can be satisfied.

We can observe that the stake accumulator currently has the following claims:

  • The registry.RegisterEntity claim is for registering an entity. It needs to satisfy the global threshold for registering the entity.

  • The registry.RegisterNode.LAdHWnCkjFR5NUkFHVpfGuKFfZW1Cqjzu6wTFY6v2JI= claim is for registering the validator node with the public key LAdHWnCkjFR5NUkFHVpfGuKFfZW1Cqjzu6wTFY6v2JI=. The claim needs to satisfy the node-validator global staking threshold parameter.

  • The registry.RegisterNode.xk58fx5ys6CSO33ngMQkgOL5UUHSgOSt0QbqWGGuEF8= claim is for registering the three compute nodes with the public key xk58fx5ys6CSO33ngMQkgOL5UUHSgOSt0QbqWGGuEF8==. The claim needs to satisfy three node-compute global staking threshold parameters.

For more details on registering entities, nodes and ParaTimes, see the Oasis Core Registry service.

info

Network and ParaTime selectors are available for the account show command.

Transfer

Use account transfer <amount> <to> command to transfer funds between two accounts on the consensus layer or between two accounts inside the same ParaTime.

The following command will perform a token transfer inside default ParaTime:

oasis account transfer 2.5 oscar --account orlando
You are about to sign the following transaction:
Format: plain
Method: accounts.Transfer
Body:
To: oscar (oasis1qp87hflmelnpqhzcqcw8rhzakq4elj7jzv090p3e)
Amount: 2.5 TEST
Authorized signer(s):
1. cb+NHKt7JT4fumy0wQdkiBwO3P+DUh8ylozMpsu1xH4= (ed25519)
Nonce: 0
Fee:
Amount: 0.000231 TEST
Gas limit: 2310
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: orlando

Consensus layer token transfers:

oasis account transfer 2.5 oscar --account orlando --no-paratime
You are about to sign the following transaction:
Method: staking.Transfer
Body:
To: oasis1qp87hflmelnpqhzcqcw8rhzakq4elj7jzv090p3e
Amount: 2.5 TEST
Nonce: 0
Fee:
Amount: 0.0 TEST
Gas limit: 1264
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: orlando
info

Network, ParaTime and account selectors are available for the account transfer command.

Allowance

account allow <beneficiary> <amount> command makes your funds withdrawable by a 3rd party beneficiary at consensus layer. For example, instead of paying your partner for a service directly, you can ask for their address and enable them to withdraw the amount which you agreed on from your account. This is a similar mechanism to how payment checks were used in the past.

oasis account allow logan 10
You are about to sign the following transaction:
Method: staking.Allow
Body:
Beneficiary: oasis1qpl4axynedmdrrgrg7dpw3yxc4a8crevr5dkuksl
Amount change: +10.0 TEST
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1278
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar

The allowance command uses relative amount. For example, if your run the above command 3 times, Logan will be allowed to withdraw 30 ROSE.

tip

To reduce the allowed amount or completely disallow the withdrawal, use the negative amount. To avoid flag ambiguity in the shell, you will first need to pass all desired flags and parameters except the negative amount, then append -- to mark the end of options, and finally append the negative amount.

oasis account allow logan -- -10
You are about to sign the following transaction:
Method: staking.Allow
Body:
Beneficiary: oasis1qpl4axynedmdrrgrg7dpw3yxc4a8crevr5dkuksl
Amount change: -10.0 TEST
Nonce: 0
Fee:
Amount: 0.0 TEST
Gas limit: 1288
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar

The allowance transaction is also required if you want to deposit funds from your consensus account to a ParaTime. The ParaTime will withdraw the amount from your consensus account and fund your ParaTime account with the same amount deducted by the deposit fee. Oasis CLI can derive the address of the ParaTime beneficiary, if you use paratime:<paratime name> as the beneficiary address.

oasis account allow paratime:sapphire 10
You are about to sign the following transaction:
Method: staking.Allow
Body:
Beneficiary: oasis1qqczuf3x6glkgjuf0xgtcpjjw95r3crf7y2323xd
Amount change: +10.0 TEST
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1278
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar
info

Network and account selectors are available for the account allow command.

Deposit Tokens to a ParaTime

account deposit <amount> [address] will deposit funds from your consensus account to the target address inside the selected ParaTime.

oasis accounts deposit 10 eugene --gas-price 0
You are about to sign the following transaction:
Format: plain
Method: consensus.Deposit
Body:
To: eugene (oasis1qrvzxld9rz83wv92lvnkpmr30c77kj2tvg0pednz)
Amount: 10.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0 TEST
Gas limit: 61310
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar

If no address is provided, the deposit will be made to the address corresponding to your consensus account inside the ParaTime.

oasis accounts deposit 10 --gas-price 0
You are about to sign the following transaction:
Format: plain
Method: consensus.Deposit
Body:
To: Self
Amount: 10.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0 TEST
Gas limit: 61285
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar

Currently, deposit transactions are free of charge, hence the --gas-price 0 parameter to avoid spending unnecessary gas fees. Also, keep in mind that deposit and withdrawal fees are always paid by your ParaTime account. If it doesn't contain any ROSE, you will not able to cover the fees.

You can also make a deposit to an account with arbitrary address inside a ParaTime. For example, let's deposit to some native address inside the ParaTime:

oasis account deposit 10 oasis1qpxhsf7xnm007csw2acaa7mta2krzpwex5c90qu6 --gas-price 0
You are about to sign the following transaction:
Format: plain
Method: consensus.Deposit
Body:
To: oasis1qpxhsf7xnm007csw2acaa7mta2krzpwex5c90qu6
Amount: 10.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0 TEST
Gas limit: 61310
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar

Or to some address in the Ethereum format:

oasis accounts deposit 10 0x90adE3B7065fa715c7a150313877dF1d33e777D5 --gas-price 0
You are about to sign the following transaction:
Format: plain
Method: consensus.Deposit
Body:
To: oasis1qpupfu7e2n6pkezeaw0yhj8mcem8anj64ytrayne
Amount: 10.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0 TEST
Gas limit: 61310
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar
info

Network, ParaTime and account selectors are available for the account deposit command.

Withdraw Tokens from the ParaTime

account withdraw <amount> [to] will withdraw funds from your ParaTime account to a consensus address:

oasis account withdraw 10 orlando
You are about to sign the following transaction:
Format: plain
Method: consensus.Withdraw
Body:
To: orlando (oasis1qq84sc4q0shp5c5klwklqu59evz2mg59hveg7dqx)
Amount: 10.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0061311 TEST
Gas limit: 61311
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar

If the address is not provided, the address of the account inside ParaTime will be used as a consensus address:

oasis account withdraw 10
You are about to sign the following transaction:
Format: plain
Method: consensus.Withdraw
Body:
To: Self
Amount: 10.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0061286 TEST
Gas limit: 61286
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar
caution

Withdrawal transactions are not free of charge and the fee will be deducted from your ParaTime balance.

Similar to the account deposit command, you can also specify an arbitrary Oasis address which you want to withdraw your tokens to.

oasis accounts withdraw 10 oasis1qpxhsf7xnm007csw2acaa7mta2krzpwex5c90qu6
You are about to sign the following transaction:
Format: plain
Method: consensus.Withdraw
Body:
To: oasis1qpxhsf7xnm007csw2acaa7mta2krzpwex5c90qu6
Amount: 10.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0061311 TEST
Gas limit: 61311
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar
caution

You cannot use the destination address of your secp256k1 account or any other Ethereum-formatted address for the withdrawal, because this signature scheme is not supported on the consensus layer!

info

Network, ParaTime and account selectors are available for the account withdraw command.

Delegate Tokens to a Validator

To stake your tokens on the consensus layer, run account delegate <amount> <to>. This will delegate the specified amount of tokens to a validator.

You can either delegate directly on the consensus layer:

oasis account delegate 20 oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk --no-paratime
You are about to sign the following transaction:
Method: staking.AddEscrow
Body:
To: oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk
Amount: 20.0 TEST
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1271
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar

Or you can delegate from inside a ParaTime that supports delegations:

oasis account delegate 20 oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk
You are about to sign the following transaction:
Format: plain
Method: consensus.Delegate
Body:
To: oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk
Amount: 20.0 TEST
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.0061312 TEST
Gas limit: 61312
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar

Once your tokens are staked, they are converted into shares since the number of tokens may change over time based on the staking reward schedule or if your validator is subject to slashing. The number of shares on the other hand will remain constant. Also, shares are always interpreted as a whole number, whereas the amount of tokens is usually a rational number and may lead to rounding errors when managing your delegations.

To find out how many shares did you delegate, run account show and look for the shares under the active delegations section.

info

Network, ParaTime and account selectors are available for the account delegate command.

Undelegate Tokens from the Validator

To reclaim your delegated assets, use account undelegate <shares> <from>. You will need to specify the number of shares instead of tokens and the validator address you want to reclaim your assets from.

Depending on where the tokens have been delegated from, you can either reclaim delegated tokens directly on the consensus layer:

oasis account undelegate 20000000000 oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk --no-paratime
You are about to sign the following transaction:
Method: staking.ReclaimEscrow
Body:
From: oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk
Shares: 20000000000
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1275
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar

Or you can reclaim from inside a ParaTime that supports delegations:

oasis account undelegate 20000000000 oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk
You are about to sign the following transaction:
Format: plain
Method: consensus.Undelegate
Body:
From: oasis1qpkl3vykn9mf4xcq9eevmey4ffrzf0ajtcpvd7sk
Shares: 20000000000
Authorized signer(s):
1. Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8= (ed25519)
Nonce: 0
Fee:
Amount: 0.012131 TEST
Gas limit: 121310
(gas price: 0.0000001 TEST per gas unit)

Network: testnet
ParaTime: sapphire
Account: oscar

After submitting the transaction, a debonding period will commence. After the period has passed, the network will automatically move your assets back to your account. Note that during the debonding period, your assets may still be slashed.

info

Network, ParaTime and account selectors are available for the account undelegate command.

Advanced

Public Key to Address

account from-public-key <public_key> converts the Base64-encoded public key to the Oasis native address.

oasis account from-public-key NcPzNW3YU2T+ugNUtUWtoQnRvbOL9dYSaBfbjHLP1pE=
oasis1qrec770vrek0a9a5lcrv0zvt22504k68svq7kzve

This command is most often used by the network validators for converting the public key of their entity to a corresponding address. You can find your entity's ID in the id field of the entity.json file.

tip

Oasis consensus transactions hold the public key of the signer instead of their from address. This command can be used for debugging to determine the signer's staking address on the network.

Non-Interactive Mode

Add -y flag to any operation, if you want to use Oasis CLI in non-interactive mode. This will answer "yes to all" for yes/no questions and for all other prompts it will keep the proposed default values.

Output Transaction to File

Use --output-file <filename> parameter to save the resulting transaction to a file instead of broadcasting it to the network. You can then use the transaction command to verify and submit it.

Check out the --unsigned flag, if you wish to store the unsigned version of the transaction and the --format parameter for a different transaction encoding.

Do Not Sign the Transaction

If you wish to prepare a transaction to be signed by a specific account in the future, use the --unsigned flag. This will cause Oasis CLI to skip the signing and broadcasting steps. The transaction will be printed to the standard output instead.

You can also use --output-file to store the transaction to a file. This setup is ideal when you want to sign a transaction with the offline/air-gapped machine machine:

  1. First, generate an unsigned transaction on a networked machine,
  2. copy it over to an air-gapped machine,
  3. sign it on the air-gapped machine,
  4. copy it over to the networked machine,
  5. broadcast the transaction on the networked machine.

Use the CBOR format, if you are using a 3rd party tool in step 3 to sign the transaction content directly. Check out the --format parameter to learn more.

Output format

Use --format json or --format cbor to select the output file format. By default the JSON encoding is selected so that the file is human-readable and that 3rd party applications can easily manage it. If you want to output the transaction in the same format that will be stored on-chain or you are using a 3rd party tool for signing the content of the transaction file directly use the CBOR encoding.

This parameter only works together with --unsigned and/or --output-file parameters.

Offline Mode

To generate a transaction without accessing the network and also without broadcasting it, add --offline flag. In this case Oasis CLI will require that you provide all necessary transaction details (e.g. account nonce, gas limit, gas price) which would otherwise be automatically obtained from the network. Oasis CLI will print the transaction to the standard output for you to examine. Use --output-file, if you wish to save the transaction to the file and submit it to the network afterwards by using the transaction submit command.

Account's Nonce

--nonce <nonce_number> will override the detection of the account's nonce used to sign the transaction with the specified one.

Gas Price

--gas-price <price_in_base_units> sets the transaction's price per gas unit in base units.

Gas Limit

--gas-limit <limit> sets the maximum amount of gas that can be spend by the transaction.

Entity Management

Initialize Entity

When setting up a validator node for the first time, you will need to provide the path to the file containing your entity descriptor as well as register it in the network registry. Use account entity init to generate the entity descriptor file containing the public key of the selected account.

oasis account entity init
{
"id": "Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8=",
"nodes": [],
"v": 2
}

By default, the file content will be printed to the standard output. You can use -o parameter to store it to a file, for example:

oasis account entity init -o entity.json
info

Account selector is available for the account entity init command.

Register your Entity

In order for validators to become part of the validator set and/or the compute committee, they first need to register as an entity inside the network's registry. Use the account entity register <entity.json> command to register your entity and provide a JSON file with the Entity descriptor. You can use the network show command to see existing entities and then examine specific ones to see how entity descriptors of the currently registered entities look like.

oasis account entity register entity.json
Signing the entity descriptor...
(In case you are using a hardware-based signer you may need to confirm on device.)
You are about to sign the following transaction:
Method: registry.RegisterEntity
Body:
{
"untrusted_raw_value": {
"v": 2,
"id": "Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8=",
"nodes": [
"nshzFvqLNNLN+HS0id5XmXrVMhIgFV456i4VQicWgjk="
]
},
"signature": {
"public_key": "Bx6gOixnxy15tCs09ua5DcKyX9uo2Forb32O6Hyjoc8=",
"signature": "DAwn+N8hKmQMbZda/fFJSEgErDAAdebXLfIPOpqUkJowJLUAL+nfrUMz5SVkKc0TnqQOavoSAVFz1yoRJ3QuBA=="
}
}
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 2471
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar
info

Network and account selectors are available for the account entity register command.

Deregister Your Entity

To remove an entity from the network's registry, invoke account entity deregister. No additional arguments are required since each account can only deregister their own entity, if one exists in the registry.

oasis account entity deregister
You are about to sign the following transaction:
Method: registry.DeregisterEntity
Body:
{}
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1231
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar
info

Network and account selectors are available for the account entity deregister command.

Change Your Commission Schedule

Validators can use account amend-commission-schedule to add or remove their commission bounds and rates at consensus layer. Rate bounds can be defined by using the --bounds <epoch>/<min_rate>/<max_rate> parameter. Actual rates which can be subject to change every epoch can be defined with the --rates <epoch>/<rate> parameter. Rates are specified in milipercents (100% = 100000m%). The new commission schedule will replace any previous schedules.

oasis account amend-commission-schedule --bounds 329000/1000/2000,335000/900/1900 --rates 329000/1500
You are about to sign the following transaction:
Method: staking.AmendCommissionSchedule
Body:
Amendment:
Rates:
(1) start: epoch 329000
rate: 1.5%
Rate Bounds:
(1) start: epoch 329000
minimum rate: 1.0%
maximum rate: 2.0%
(2) start: epoch 335000
minimum rate: 0.9%
maximum rate: 1.9%
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1361
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar

To learn more on commission rates read the section inside the Oasis Core Staking service chapter.

info

Network and account selectors are available for the account amend-commission-schedule command.

Unfreeze Your Node

Once the validators, based on their stake, get elected into the validator set, it is important that their nodes are actively participating in proposing new blocks and submitting votes for other proposed blocks. For regular node upgrades and maintenance, the validators should follow the Shutting Down a Node instructions. Nevertheless, if the network froze your node, the only way to unfreeze it is to execute the account node-unfreeze

oasis account node-unfreeze fasTG3pMOwLfFA7JX3R8Kxw1zFflqeY6NP/cpjcFu5I=
You are about to sign the following transaction:
Method: registry.UnfreezeNode
Body:
{
"node_id": "fasTG3pMOwLfFA7JX3R8Kxw1zFflqeY6NP/cpjcFu5I="
}
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1274
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar
info

Network and account selectors are available for the account node-unfreeze command.

Burn Tokens

account burn <amount> command will permanently destroy the amount of tokens in your account and remove them from circulation. This command should not be used on public networks since not only no one will be able to access burnt assets anymore, but will also permanently remove the tokens from circulation.

oasis account burn 2.5
You are about to sign the following transaction:
Method: staking.Burn
Body:
Amount: 2.5 TEST
Nonce: 2
Fee:
Amount: 0.0 TEST
Gas limit: 1235
(gas price: 0.0 TEST per gas unit)

Network: testnet
ParaTime: none (consensus layer)
Account: oscar
info

Network and account selectors are available for the account burn command.

Pools and Reserved Addresses

The following literals are used in the Oasis CLI to denote special reserved addresses which cannot be directly used in the ledger:

Consensus layer

  • pool:consensus:burn: The token burn address.
  • pool:consensus:common: The common pool address.
  • pool:consensus:fee-accumulator: The per-block fee accumulator address.
  • pool:consensus:governance-deposits: The governance deposits address.

ParaTime layer

  • pool:paratime:common: The common pool address.
  • pool:paratime:fee-accumulator: The per-block fee accumulator address.
  • pool:paratime:pending-withdrawal: The internal pending withdrawal address.
  • pool:paratime:pending-delegation: The internal pending delegation address.
  • pool:paratime:rewards: The reward pool address.